Set focus, brightness, and zoom
Updated:
On the capture screen, you can work directly on the camera image to set focus and brightness and change the magnification. This works on the live preview.
Set focus and brightness
Tap the spot you want in focus. A yellow square appears there, and focus and brightness are set for that spot. The sun mark beside the square shows how much you’ve adjusted the brightness.
After you tap, drag up or down while the square is showing to adjust the brightness. Dragging up makes the image brighter, and dragging down makes it darker. The square disappears about 2 seconds after you finish adjusting.
Lock focus and brightness
Touch and hold a spot on the image to lock focus and brightness there. AE/AF Lock appears above the square. To release the lock, tap anywhere on the image. Focus and brightness go back to adjusting automatically at the spot you tapped. The square stays while the lock is on, so you can still drag up or down to adjust the brightness.
Change the magnification
- Pinch the image with two fingers to change the magnification.
- With the back camera, the magnification button shows the current magnification. Each tap switches to the next lens, and after the last lens it returns to the first.
With a single-lens camera, such as the front camera, the magnification button doesn’t appear.
Was this article helpful?
Choose a reason
Thank you for your feedback.
If you still need help, use the contact form.