A room snaps to a neighboring edge when moved

This article explains what to do if a room lands somewhere other than where you release it. Its position is automatically adjusted to prevent overlap and align edges. Moving it onto another room places it beside that room; bringing it close to a neighboring room snaps it into contact without a gap.

Rooms can’t overlap. These adjustments happen automatically:

• Positions align to 0.1 m increments.
• Edges align when within 0.2 m of a neighboring room’s edge.
• Releasing a room in an overlapping position places it at the nearest position where edges meet.

Option 1

Move the room to a position without overlap

1. Drag the room to an open area away from other rooms.
2. Release your fingers. The room stays apart from the others.

If the position doesn’t overlap, the room stays there.

Option 2

Leave more than 0.2 m to avoid edge alignment

Release the room more than 0.2 m from a neighboring edge to avoid snapping to it. The position still aligns to 0.1 m increments.

Option 3

Move the neighboring room first

If another room occupies the intended location, Move and rearrange rooms first, then place the room you want to move.

When adding a room, select a room beside the intended location before tapping Add Room. The new room appears to its right.

If the problem continues, include:

• The moved room’s name and its positions before and after the move
• The number of nearby rooms and their approximate sizes
• The visionOS version on your Apple Vision Pro and your Madori Walk version